Outline of product
Equipped with AVC/HEVC hardware codecs to facilitate stable transmission. This device also supports playback, RETURN, TALLY, INTERCOM, and camera control signals for communication, allowing it to be used with existing system cameras.
Features
・3G/HD-SDI signal encode/decode, transmission with SRT protocol
・Supports H.264, MPEG-4 AVC, H.265, MPEG-H HEVC codecs
・Transmission support for send back, TALLY, INTERCOM, and camera control signal communication
・Display switch between HD-SDI input signal and received IP stream signal (RETURN)
・Connects via USB/WLAN, Wi-Fi also available
・Supports power supply from system camera and battery mount
・1920x1200 7-inch LCD screen to view dot-by-dot video
Specifications
| Item | Description |
| IP Interface | 1000Base-T Ethernet：2 lines |
| Transmission Protocol | SRT |
Video | Interface | 3G/HD-SDI Input：1 line
3G/HD-SDI Output：1 line |
| Format | 1920×1080
60p/59.94p/50p/30p/29.97p/25p/24p/23.98p
YCBCR 4:2:2 10bit LevelA
60i/59.94i/50i/24PsF/23.98PsF
YCBCR 4:2:2 10bit |
| Codec | H.265 | HVEC 4:2:2/4:2:0 10bit
H.264 | MPEG-4 AVC 4:2:2 10bit/4:2:0 8bit
BitRate:512Kbps-95Mbps CBR、VBR |
Audio | Interface | XLR-4pin male connector
①MIC COLD ②MIC HOT ③GND ④Headphone |
| Format | 48kHz 24bit Max6ch
SDI Embedded：4ch, INTERCOM：2ch |
| Codec | AAC-LC |
| GPIO | D-sub 15pin male connector |
| Tally | TSL UMD protocol V5.0 Tally |
| USB3.0 | TypeA connector |
LCD | Screen Size | 7.0 inch |
| Luminance | 300cd/㎡（typ） |
| Resolution | 1920×1200 Pixels |
| Contrast Comparison | 1100：1 |
| General Specifications |
| Power Source | DC10.5-17V |
| Power Consumption | 20W MAX |
| Operating Temperature | 0～40℃ (without condensation) |
| Operating Humidity | 20～80%RH (without condensation) |
| Dimensions | 220(W) x 133(H) x 62(D）mm (excluding protrusions) |
| Weight | 1.15kg |
