General
The VA-1845 is an HDMI 2.0b (6G and HDCP 2.2) supported source tester which enables test automation for the production line and quality control. Since it supports both analysis and signal generator functions, it is also suitable for testing HDMI cables, switchers, repeaters like AVRs.
Features
a) Analysis functions, such as video timing, video level, audio level and frequency, Packet, HDCP(1.4, 2.2), DDC, SCDC, CEC, etc.
b) 1 OUT and 3 IN HDMI connectors (Note : If more OUT connectors are required, please contact us)
c) Maximum 4K/60p RGB/YCbCr 444, 422 EIA Timing with 8,10,12bit color depth
d) Generator function, selectable CEA-861-F Video Code timings, test patterns and InfoFrame setting
e) USB memory for saving analysis data and test log files. Test results can also be sent to host PC by Ethernet.
f) Automation can be operated by optional application software or user’s original control program.
h) Loading EDID from downstream or programmable by the software.
Optional Software Image
Front Image
Specifications
HDMI Input / Output Specifications
Item | Specification | |
---|---|---|
Transfer Rate | TMDS 25 to 594MHz(150MHz at 12bit) | |
Deep Color | 8, 10, 12, 16bits (8bit at timings over 300MHz) | |
Color Space | RGB / YCbCr 444, 422, *420 | |
HDCP | Ver.1.4 and 2.2 | |
I2S / SPDIF 8ch | 32KHz to 192KHz (L-PCM 2 to 8 channels) | |
Compressed Audio | Header (Pa to Pd) decode supported | |
DDC | Ver.1.4(DDC 2B) compliant | |
E-EDID | Supported (CEA EDID Timing Extension : CEA-861-F) |
USB / Control Interface
USB Memory | Host (for USB flash drive), Device (for control via PC) | |
LAN | 10/100BASE-T | |
RS-232C | Connect to computer and control is carried out via terminal commands. |
General
Operating Temperature | +5 to 40 degrees | |
Storage Temperature | -10 to 60 degrees | |
Storage Humidity | 20 to 80%RH with no condensation | |
Power Supply | AC100 to 240V | |
Power Consumption | 50W | |
Dimensions | 44(W) x 320(H) x 260 (D) mm | |
Net Weight | Approximately 2.0 kg |
Download
*Data Sheet |